PHOTO
| Photo resolution | 32MP |
| Time-Lapse Mode | Time-Lapse+ |
| Multi-shot mode | Max 10 Photos in series |
| Stamp on pictures | Date, time, moon phase & temperature (°C/°F) |
VIDEO
| Video resolution | 4K |
| Sound Recording | Yes |
| Video length | 3sec-10Minutes.; Programmable |
ILLUMINATION OPTIONS
| Capture mode | Color by day, infrared by night |
| Number of IR lamp | 42 pcs 850nm IR LEDs |
| Flash range | 90°（25m） |
| PIR sensors | 1 pcs |
| Exposure | Automatic adjustment of the infrared illumination |
DETECTION SYSTEM
| Trigger speed | 0.1Second |
| Detection distance | 90°（25m） |
MEMORY/POWER
| Memory card | Max 512 GB (not included) |
| Power | 4 or 8 alkaline 1.5V AA batteries (not included) |
| Power2 | 4 or 8 pcs of rechargeable lithium battery over 3000mAh |
| Power3 | 6V 1.5A-2A Trail Camera Solar Panel |
| External power | 6V 1.5A-2A AC adapter with 3.5mm*1.35mm DC jack size |
OTHERS
| Storage formats | Photo: JPEG; Video: AVI |
| Screen | 2.4 Inches TFT-LCD Color Display |
WARRANTY
| "Know you’re covered" warranty | 2 years |
When you use the trail camera for the first time, please format the memory card in the camera. Do not insert or remove the SD card while the camera is on.
In order to prolong the standby time of the camera, we recommend using high-quality 8 * 1.5V AA large capacity alkaline batteries. Support DC 6V 1.5-2.0A external power supply. The camera can use high-quality lithium-ion rechargeable batteries. It is recommended to use a larger capacity battery or a constant voltage lithium-ion battery. Note that the battery power should reach 1.5V after being fully charged. If you use a rechargeable battery, you need to place the battery in the battery compartment in a professional charger to charge it. Please do not directly use the charger to charge the battery in the camera's battery compartment.
In order to get the best picture, please remove the protective film from the camera lens. Please remove all obstacles in front of the camera as much as possible. Please install the trail camera in a place with sufficient light.
The supplied USB data cable is not a charging cable. The USB data cable is only used for data transmission and cannot be used as a charging cable to power the camera. The real port for the external power supply is on the outside of the camera. Code 20: External power port
